The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.
The MSW-H412AC-DS is a 4x2 HDMI 2.0 matrix supporting resolutions up to 4K60 4:4:4. The matrix features three HDMI 2.0 inputs and one USB-C input that also provides up to 60W of power delivery to the connected USB-C source. It has two HDMI 2.0 outputs that supports 4K to 1080P automatic downscaling eliminating the need for a separate scaler when mixing 4K and 1080P displays. The unit also features an independent audio matrix with volume control and delay settings per output. The MSW-H412AC-DS supports various control options, front panel, IR, RS232, TCP/IP and WEB-UI. It comes fully packed with extensive configuration and settings options to make the installation go smoothly and integrate easily with any application. KEY FEATURES • Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.3. • 3 x HDMI Inputs, 1 x USB-C Input, 2 x HDMI Outputs • Provides up to 60w Power Delivery on USB-C input. • Features an independent audio matrix. • Supports 4K auto downscaling to 1080p on HDMI outputs. • Extensive EDID management, and HDCP management on input and output side. • Supports CEC control for devices connected on inputs and outputs • Various control options: Front panel, RS232, IR remote, TCP/IP and WEB UI.
MSW-H614A-HDBT från TiGHT AV är en toppmodern matrisväxlare med 6x4+2 18G HDMI 2.0. Den har två HDBaseT-ingångar och fyra HDMI-ingångar med stöd för HDCP 2.3/1.x och kan hantera upplösningar upp till 4K60 4:4:4. Matrisen kan överföra 4K60-video upp till 40 meter och 1080p-video upp till 70 meter över HDbaseT på en CAT6A-kabel. Detta gör den idealisk för installationer där avstånd mellan vissa källor och skärmar är längre.
The SW-H411A allows selection of four different sources (three HDMI inputs and one DisplayPort input) and will switch the selected video to the HDMI output. The audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. It supports video resolutions up to 4K x 2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is a smart built-in EDID setting that can be selected by the 4-pin DIP switch on the rear panel. The SW-H411A supports stereo and multichannel audio on the HDMI inputs. In addition to the audio embedded in the HDMI output stream, the audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. This switcher also features user friendly automatic switching and display control - no need for a separate control system. The switcher can also be manually controlled by the front panel buttons, IR remote, TCP/IP and RS232 command. The SW-H411A features a web UI for configuration and control. The Web UI can be set up to accessed from anywhere for easy support. KEY FEATURES: • Supports HDMI 2.0 and resolutions up to 4K@60Hz 4:4:4 8bit, 1080P, and 3D. • 18Gbps bandwidth and supports HDR10, HDR10+, Dolby Vision. • HDCP 2.3 compliant. • Video source auto-switching. • Automatic display control via CEC or RS232. • CEC control for display volume and ON/OFF. • Controllable via TCP/IP, RS232, IR. • Open API for third party control via TCP/IP and RS232. • Web UI for control and configuration. • Optical and balanced analog audio for audio de-embedding. • Smart EDID management for various application and customized setting.
The SW-H411AU-BYOD is a presentation system that supports both wired and wireless BYOD content sharing. Besides the wireless content sharing, the 4x1 BYOD switcher offers two HDMI 2.0 inputs and one USB-C input ideal for the latest MacBooks and PCs with 60W of charging power. This presentation system also features user friendly automatic switching and display control - no need for a separate control system. USB peripherals in the room can be shared to the active source such as USB cameras, USB microphones or keyboard and mouse which makes the SW-H411AU-BYOD ideal to use in meeting rooms. KEY FEATURES: • Wireless BYOD (Bring Your Own Device) capability via AirPlay and Miracast. • Supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.2. • Video source auto-switching. • USB sharing, two type-B USB ports for host connection, and two type-A USB ports for USB devices like camera, microphone, and keyboard. • Provide up to 60w charging, USB data (USB 3.0/2.0) and 4K video transmission on USB-C port. • Automatic or manual display control via CEC or RS232 commands. • Open API for third party control via RS-232. • HDMI output audio can be de-embedded out via balanced analog audio port. • Smart EDID management and UI for configuration.